There is currently a lot of discussion concerning the best method for bonding BruxZir® Solid Zirconia to a prepared surface. Glidewell Laboratories Director of Clinical Education and Research, Dr Michael C. DiTolla informs that he receives a lot of questions regarding how to bond the material into place.
Due to BruxZir® Solid Zirconia’s unique properties, it is not affected by sandblasting, hydrofluoric acid and typical silanes. Dr DiTolla 
recommends using a special silane, namely Z-PRIME™ Plus. Below is a link to his Clinical Tips page and YouTube video respectively for more information on bonding BruxZir® Solid Zirconia.
Dr DiTolla’s Clinical Tip on Bonding BruxZir® Solid Zirconia
Video on Bonding BruxZir® Solid Zirconia
For further information on the product, please either click on the manufacturer’s site below, or the direct links to the Z-PRIME™ Plus literature for your convenience (courtesy of Bisco Inc. Schaumburg, IL, 2012).
You can purchase Z-PRIME™ Plus in Australia from Erskine Dental Australia here.
All the best!
Mike Hussey
Director